XStreamTM Production Gang Flash Programmers

Elprotronic Gang xstream programmer

The most cost effective solution for flashing code into single or multiple ARM Cortex devices: XStream Flash Programmer Adaptor (FPA).

Comes with its own GUI software and capable of programming one MCU or 100’s of MCU’s at the same time. Recognized by most chip-vendors as a leading flash programming production tools, XStream sets the standard for fast deployment of 100’s of target boards simultaneously for either field testing or even full production.

 Elprotronic Gang Programmer Setup

XStream Features:

Data transfer up to 1 Mbytes/s
JTAG/SWD speed up to 20 MHz
Galvanic Isolation 2.5 kV
Vcc: 1.65 – 4.0 V, current up to 200 mA
Current measurements 20uA – 500 mA
Up to 64 adapters can be connected to one PC
Each adapter can program 6 devices (Total 384 target board)
Checksum verification
No Code size limitations
Full memory or page-memory erase capability
Easy to use Windows based GUI (comes with API version too)
Comply with FCC and CE requirements

XStream Flashers and Gang Programmers support most Chip-vendors ARM devices from STMicro, NXP, Atmel, SiLab as well as TI MSP430, TI Chipcon & TI C2000. They come ready to be used out-of-the-box with an easy to use software interface.

For a complete list of Gang production programmers, please click here.

For more information and licensing please Contact Emprog

*XStream is a trade mark of Elprotronic Inc, 35 Austin Rumble Crt. King City ON, L7B 0B2


ARM and MSP430 Gang Programmers